Moulders
the wEINIG UNILINE SERIES
The New Uniline Series - Step up to Weinig Quality at a price comparable to a used machine.
There are more Unimat series machines in service worldwide than any other moulder ever built.

A new multi-faceted construction and assembly strategy lets us produce the Uniline Series more efficiently than ever before. And at an unprecedented price point!

Unimats are currently available in 4 models:

  • The Unimat 350 and the Unimat 450 are workhorses for general production with a smaller footprint to take up less shop space. An impressive list of standard features and optional equipment make either one an excellent choice for any shop.
  • The Unimat 650 and the Unimat 850 were designed from the ground up for heavy production requirements. With outboard bearings and big horsepower, you can run large profiles and small pieces with the same efficiency!
  • The Unimat 850  has a finished working width of 12 1/16" at a price that gives you Weinig quality and extra features at a better value than any moulder available anywhere!


Unimat 350-450

To make an informed decision about a moulder purchase, look hard at the following elements of machine design and construction. Quality and tolerance are critical in all these areas:

Weinig Design Your Benefit
  • Designed by computer, stable, made from heavy cast iron.
  • Extreme vibration absorption and torsion free.
  • Compact unit construction.
  • Spindle slides can easily be lubricated.
  • Hard chromed tables and fences.
  • Table plates adjustable from the front.
  • Fences mounted to the machine base, and quickly adjustable to the tool cutting circle.
  • Wearing plates surface mounted.
  • High absorption of vibrations, perfect distribution of weight and mass.
  • Consistent high surface quality, precise dimensions.
  • Minimal floor space required.
  • Long machine life.
  • Long lasting machine parts, protection against wear.
  • Better work piece control with smaller openings in plates.
  • Superior surface quality through minimal openings in fences, easy removal of fences.
  • Quick and simple exchange of table plates.

the wEINIG UNIMAT SERIES

Flexible, small footprint, and easy to operate, the Unimat series is perfect for small shops and short production runs with either small or large profiles.

Unimats are currently available in 6 models:

  • The Unimat 300 and the Unimat 500. In addition to the standard machines, they can be equipped with many special application packages. The new Unimat 800 is a very large machine for big profiles.
  • For high horsepower requirements or specialty moulding production, the Unimat 23EL. Available with special configurations for short or large timber and options such as the tilting feed works for bevel resawn ingoing stock.
  • For horizontal sawing and splitting, the Unimat 23SP takes veneer production or accurate splitting to the next level.
  • The Unimat Super 4 is made for planing and squaring timber for gluing applications.
  • The Unimat Gold is a standardized machine produced in large quantities to give you a lot of machine at a very low price.
WEINIG UNIMAT 300    CLICK HERE FOR MORE DETAILS
  • Moulder technology designed for small and medium-sized companies.
  • Planing and moulding with very little training or experience required.
  • Pneumatic Pressure For Feed Rollers - Constant pressure even for work pieces of different thickness.
  • Infeed Roller In Front Of First Bottom Spindle - Up/Down adjustment switch in control panel for easy switching between straightening and moulding functions.
  • Tall Fences On The Right And Pressure Rollers From Above - For precise control of short parts and small cross sections.
  • Compact Design - Small space and power requirements.
  • 200 mm Cutting Circles - Up to 30mm depth of cut.
  • Adjustable Feed Roller - Opposite of the left spindle, this roller can be adjusted quickly from wide stock to completely hidden behind the machine fence.
  • Central Adjustment Of Pressure Elements - Digital readouts on top and left pressure elements allow quick setting to different tool diameters with a single adjustment for each spindle.


Interested in More Information?
WEINIG UNIMAT 500   CLICK HERE FOR MORE DETAILS
  • The latest in moulder technology designed for small and medium-sized companies.
  • Pneumatic Pressure For Feed Rollers - Constant pressure even for work pieces of different thickness.
  • Adjustable Table Plates - Plates adjust easily to different cutting circles for maximum support of small cross-sections. Faster, easier, safer.
  • Tall Adjustable Fences On The Right And Pressure Rollers From Above - For precise control of short parts and small cross sections.
  • Straightening Table - Standard infeed table is 2 meters long and includes a rebate cutter for precise straightening of crooked stock.
  • 200 mm Cutting Circles - Up to 35mm depth of cut.
  • Central Adjustment Of Pressure Elements - Digital readouts on top and left pressure elements allow quick setting to different tool diameters with simple adjustments for each spindle.

The WEINIG Powermat series
Powermat 400   |   Powermat 500   |   Powermat 1000    |    Powermat 2000   |   Powermat 3000

The WEINIG Powermat 500 -

  • PowerLock Tooling System - New Weinig tooling technology for fast and simple cutterhead changes and a superior surface finish.
  • 8000 RPM - For optimum surface quality with higher feed speed and more output.
  • Frequency Controlled Feed - Exact setting of the feed speed with a simple dial. Infinitely variable from 5 to 30 meters per minute.
  • Large Cutting Circles - Moulding tool holders have a maximum of 200mm. Up to 35mm depth of cut is possible.
  • Superb Finish Quality With Faster Feed Speeds And Easy Operation
  • Available with the Weinig Memory System - Once a profile is produced, it can be repeated with the push of a button. The setting data of any profile produced in the past can be called up at any time.

The WEINIG Powermat 1000 -

  • The latest in moulder and cutterhead technology designed for small and medium-sized companies.
  • PowerLock tooling for push-button changeovers and superior finish quality.
  • With the Powermat 1000 you can double the output, reduce the cost per finished piece and shorten delivery times.
  • Select a profile.
  • Press a button to unclamp the cutterheads.
  • Put in new tools, press the button to re-clamp the heads.
  • Adjust the fences and pressure elements with no wrenches.
  • With the PowerCom Control System, press a button to position the machine.



    Interested in More Information?

The WEINIG  Powermat 2020 -

  • Equipped with the patented PowerLock tooling system, you can change profiles faster than ever before.
  • For longer runs, the built-in jointers let you increase the feed speed up to 262 feet per minute with only 4 knives in the head. Less grinding, less cost and faster production.
  • Jointing At 10,000 RPM - With No Outboard Bearings!
  • Only possible with the PowerLock system, the cutters spin at 10,000 RPM. You can run your short runs faster than before with only 2 knives, and joint 4 knives at nearly double the feed speed you can run now!
  • Precise material control with high available horsepower (up to 50 HP) gives you the flexibility to be competitive in today's markets.
  • Optional features such as variable cutterhead speed (from 4,000 to 12,000 RPM) and your choice of control systems allow us to tailor your Powermat 2020 just for your requirements.

The WEINIG  Powermat 3000 -

  • Increases production by a factor of 4 or more.
  • Reduction of production costs by up to 60%.
  • Double the production speed while maintaining superior surface quality.
  • Fast and easy tool changes.
  • The machine can be pre-set for the next profile while still in production.
  • Reduction of set-up time up to 90%.
  • Easy and clear operator prompts on the screen.
  • Operator instructions integrated into computer menus.
  • Electronic spare parts catalogue.
  • Integrated modem interface for remote support.
  • On-line assistance and error diagnosis.
  • Sensor-controlled tools for first bottom head.
  • Automatic setting of the machine from the PC.
  • Conforms to CE specifications. Manufactured to ISO 9001 standards.

Waco and Weinig Highspeed Series

The answer when only high speed production will meet your needs. Select from an application-oriented product range.
From the popular Hydromat 1000 to the power package Powermat 6000.
Hydromat 1000   |   Hydromat 2000    |   Hydromat 3000   |   Hydromat 4000   |   Hydromat 5000   |   Hydromat 6000
Hydromat 2000 moulder for 12 inch wide capacity and feed speeds up to 330 ft. per minute. Hydromat 1000 moulder for feed speeds up to 200 ft. per minute. Hydromat 3000 moulder for profile feed speeds up to 600 ft. per minute. Hydromat 5000 moulder for profile and planing speeds up to 1230 ft. per minute.
Hydromat 2000 Hydromat 1000 Hydromat 3000 Hydromat 5000

   The best surface quality possible with feed speeds from 200 ft. per minute up to 3000 ft. per minute. The High-speed Series moulders are all built for speed, not just a slower model with jointers added later. Heavy construction, robust feed gear and pressure elements ranging from just heavy to massive.  All with integrated enclosures, spindle brakes and with safety up to strict quality standards. User-friendly operator design and of course, the top quality service from the world market leader.

Interested in More Information?
ProductsThe Lines We CarryEquipment Currently AvailableContacting FC Machinery Ltd.