|
|
- 1 Large revolving steady with pre-cutting
tool
- 1 Small revolving steady
- 2 Reducing bushes
- 1 Dowel cutting knife
- 2 V-shaped Tantung gouges
- 2 Ball bearing tailstock centres
- 3 Drive centres with centering cup
- 2 V support for workpiece centring with
square section over 100 mm up to 178 mm
- Grease pump for re-circulating ball and
screw drive
|
|
|
CENTAURO CNC LATHES T90 T90/S
The T90 and T90/S are CNC lathes which store, on a floppy disc, the profile of
the component to be produced (stair posts, chair or table legs) removing the
need for a timber original or a metal template. The graphic creation and
storage of the profile is made quickly on any desk PC thanks to our dedicated
software or directly by the computer on board the machine. The control
computer also stores the optimum cutting data, i.e. saddle speeds, the number
of needed passes as well as the position of any dowels. Due to the precision
re-circulating ball and screw drive to the X and Y axis, the movement and
speed of the tool saddle can be very accurately controlled thus giving
excellent quality and definition to the turned workpiece. As the T90 and T90/S
may be re-set betwwn different components in an extremely short time, many
different turnings may be produced in one working shift. This unique ability
to produce short batches of many different designs, reduce "work in
progress" stocking costs substantially. Thanks to the optional hopper
feed that automatically loads timber blanks, continuous uninterrupted
production runs are also available.
- 1 Special revolving steady
- 1 Revolving steady 100x100
- 1 Revolving steady 65x65
- 2 Reducing bushes
- 1 Dowel cutting knife
- 2 V-shaped Tantung gouges
- 2 Ball bearing tailstock centres
- 3 Drive centres with centering cup
- 2 V support for workpiece centring with square section over 100 mm up to 178 mm
- Grease pump for re-circulating ball and screw drive
|
|
- Press button manual electric controls
- Hydraulic copying unit with highly-sensitive tracer working on both wooden samples and templates
- Capable of two working passes, both on profile
- Turning with a single Tantung gouge, radius 1,2 mm
- Semiautomatic mechanical workpiece centering device
- Electric spindle brake
- Spindle reversing gear to change from copying to manual working and vice versa
|
- Motor protection switch and emergency push-button
- Revolving steady Ψ 90 mm (max. square 65x65 mm)
with reducing bush and pre-cutting insert knife
- Ball bearing tailstock centre Ψ 12 mm
- Driving centre with two interchangeable jaws Ψ 28 and 45 mm
- Two vertical-slides c/w back knives for making pins (I R.H. and I L.H.)
- One parallel turning tool 20x20x100 mm c/w support
- One Tantung gouge, radius 1,2 mm
- Rear face plate Ψ 220 mm and tool support bracket 300 mm for hand turning
- Saw dust hood Ψ 100 mm
|
|
CENTAURO T4 SEMI-AUTOMATIC COPY LATHES
 |
|
OPTIONAL
- Revolving steady Ψ 110 mm (80)
- Self-centring steady with 4 jaws for square min 30x30 max 60x60
- Revolving steady for curved workpieces
- Hydraulically controlled vertical slides
- Brushings for revolving steady
- AG 125 gouges grinder
- Drive centre Ψ 20 mm with 4 jaws
- Reinforced drive centre Ψ 45 mm with 4 jaws
- Reinforced drive centre Ψ 45 mm with 6 jaws
- Reinforced revolving tailstock centre Ψ 48
- Tantung or Cobalt gouges (radius 0,6 mm 1,2 mm 3,5 mm)
|
|
 |
|
The line of TM manual lathes offers the possibility to choose a lathe with the distance between centers
required and with all useful attachments for any manual turning.
The TM lathe can turn wood pieces having a max. diameter of 500
mm. ball bearing centers and at last, the possibility to fit on
the rear face plate wood pieces of large diameter.
|
- 2 tool support brackets 160 and 400 mm
- Front and rear face plate 220 mm Ψ
- Driving center Ψ 28 mm
- Tailstock center and spanners
- In the CE execution the TM Lathes are
equipped with self-braking motor, thermal motor protection switch and safety micro-switch to doors as well as with
emergency stop.
|
|
|
CENTAURO TM
AC 1300
WOODTURNING
|
TECHNICAL SPECIFICATIONS
|
TM 1200
|
TM 1600
|
TM 2000
|
| Distance between centers |
mm
|
1200
|
1600
|
2000
|
| Height of centers |
mm
|
250
|
250
|
250
|
|
Max. turning Ψ
|
mm
|
500
|
500
|
500
|
|
Motor power ( 3-phase )
|
Hp/Kw
|
2,2-3 / 1,6-2,2
|
2,2-3 / 1,6-2,2
|
2,2-3 / 1,6-2,2
|
| Motor power (1-phase ) |
Hp/Kw
|
2/1,5
|
2/1,5
|
2/1,5
|
| Spindle speed with 3 ph motor |
R.P.M.
|
600/900/1100/1300/1500/1800/2200/3000
|
|
Spindle speed 1 phase motor
|
R.P.M.
|
400/800/1300/2000
|
| Net weight |
kg
|
250
|
250
|
300
|
| Gross weight (wooden crate) |
kg
|
300
|
355
|
390
|
|
Gross weight (wooden case)
|
kg
|
350
|
430
|
480
|
| Length |
mm
|
2060
|
2460
|
2860
|
| Width |
mm
|
440
|
440
|
440
|
|
Height
|
mm
|
1220
|
1220
|
1220
|
|
Seaworthy packing size
|
mm
|
2200x600x1380
|
2600x600x1380
|
3000x600x1380
|
|
Noise level
|
dB(A)
|
72
|
72
|
72
|
|
|
|
|
|
|
|
|
|
INTOREX CNX-1300/1600 AUTOMATIC LATHE
The CNX is a fully automatic, hopper-feed CNC
lathe equipped with 2 CNC copiers and two tool-holder units
A one-piece, heavy duty, cast iron frame assures vibration-free, height quality
turnings. Due to the CNC technology, set up and change over is extremely fast.
Carriage mounted on precision hardened and
ground linear bearings. A large, high precision ball screw driven by servo motor
assures precise and smooth movement.
As an option can be equipped with a milling drive
head for twisting and fluting controlled by a CNC.
Moreover, is also possible to add another
programme in the machine which allows to turn by the roughing copier and then
twisting or fluting by the finishing copier where there will be a drive head
milling assembled
|
Technical specifications
- Maximum turning length 1300/1900 mm
- Maximum turning diameter 280mm
- Power rating, head drive motor 8 - 12 HP
- Power rating, hydraulic central motor 2,2 HP
- Total installed power rating 21 Kw
- Net weight 3450/3650 Kg.
- Size 3.50x2.20X2.10(h) /4.20x2.20x2.10 (h)
|
 |
|
Technical specifications
- Maximum turning length 1500/2500 mm
- Maximum turning diameter 300mm
- Power rating, head drive motor 8 - 12 HP
- Power rating, hydraulic central motor 2,2 HP
- Total installed power rating 21 Kw
- Net weight 3450/3650 Kg.
- Size 3.50x1.80X2.10(h)/4.20x1.80x2.10 (h)
|
|
INTOREX CNI-1500/2500
AUTOMATIC LATHE
CNC lathe with manually feeder equipped with 2 CNC copiers and two tool-holder units for making dowels .
A one-piece, heavy duty, cast iron frame assures vibration-free, height quality turnings. Due to the CNC technology, set up and
change over is extremely fast.
Carriage mounted on precision hardened and ground linear bearings. A large, high precision ball screw driven by servo
motor assures precise and smooth movement.
As an option can be equipped with a milling drive head for twisting and fluting controlled by a CNC.
Moreover, is also possible to add another programme in the machine which allows to turn by the roughing copier and then
twisting or fluting by the finishing copier where there will be a drive head milling assembled
|
|
INTOREX CX-1300/1600 AUTOMATIC ELECTRONIC LATHE
Fully automatic electronic lathe equipped with 2 hydraulic copiers and 2 form tool sets.
Hopper loading is fully automatic up to squares 140x140 mm. and semi-automatic up to diameters of 280 mm.
The drive head is equipped a 10 HP motor controlled by PLC with an inverter so that you can always work at the turning
speed you want to use and halt the head at the end of the cycle.
The lathe has PLC with programmed logic with a self-programming system to set up, modify and memorise several working cycles or
models of different pieces.
|
Technical specifications
- Maximum turning length 1300 / 1900 mm
- Maximum turning diameter 280 mm
- (sq. section 200 mm.)
- Power rating, head drive motor 10 HP
- Power rating, hydraulic central motor 3 HP
- Total installed power rating 10 Kw
- Net weight 3.250 / 3.450 Kg.
- Size 3,50x2,20x2,10 (h) / 4,20x2,20x2,10(h)
|
 |
|
Technical specifications
- Maximum turning length 1500 / 2500 mm
- Maximum turning diameter 300 mm
- Spindle motor revolutions 400 5000 r.p.m.
- Power rating, head drive motor 10 HP
- Power rating, hydraulic central motor 2 HP
- Total installed power rating 9 Kw
- Net/gross weight 2500 / 3200 Kg.
- Size 3,70x1,75x2,10 (h)
|
|
INTOREX CL-1500/2500 ELECTRONIC COPY LATHE
Electronic copy lathe with automatic working cycle and manually feeder. Very robustly constructed with double bed equipped with two
copiers and two tool holder units for dowel.
The copiers saddle slides on a circulating ball spindle and shoes on tempered, rectified guides.
The drive head is equipped with a 10 HP motor controlled by PLC with a frequency converter so that you can always work at the rotation
speed you want to use and halt the head at the end of the cycle .
The machine is fitted with PLC with programmable logic
control and an automatic programming system for the creation, modification and storing in memory of some work cycles according to the profile to be
mechanized.
As an option, it can be fitted with a unit consisting of two-position milling holder (vertical and horizontal) running at
6000 r.p.m with a 2 Hp motor for fluting and/or for making spirals
The CI-2500 model has the same technical specifications as the CI-1500 but allows to turn up to 2500 mm length
|
|
INTOREX RM 115
ROTARY LATHE
Rotary lathe. Electronic multi-spindle lathe for turning and sanding pieces
up to 300 mm length. The machine is fitted with a rotating drum and six working
phases as follows:
- Start the cycle and load the work piece.
- Roughing position with three cutters and the possibility of working in one or two phases.
- Finishing position with form tools.
- First sanding phase with an oscillating brush unit and sanding paper.
- Second sanding phase with an oscillating brush unit and sanding paper.
- End of cycle and automatic unloading the turned and sanded piece.
The spindle motor is equipped with a motor of 12 HP
controlled by a PLC and inverter for working at the most suitable rotation speed
As an option, the machine can be fitted with a boring unit with a 2HP motor .
This unit bores the piece of wood before of being turned.
|
Technical specifications
- Maximum turning length 300 mm
- Maximum turning diameter Ψ 125 mm sq 115x115 mm
- Power rating, head drive motor 12 HP
- Power rating, hydraulic central motor 3 HP
- Total power rating 14 Kw.
- Net/gross weight 2600 / 2950 Kg.
- Size 265x205x2'00 (h)
|
|
 |
Equipped with a Marathon motor.
Industry proven high and low acceleration/deceleration variable
frequency
Large 12" ductile iron tool rest and base move easily on ground
bed ways for maximum tool placement and versatility.
Steel bed design is 20 times torsionally stiffer than typical
cast-iron bed designs.
Variable frequency drive controls are located close to workzone for
convenient operation.
4" hard-wood or steel spacers can be added to adjust height. |
|
DELTA INDUSTRIAL Model
46-756 16"
Motor
2 HP
Capacity (distance btwn. centers)
42"
Capacity (swing over base)
11 1/2"
Motor
2 HP
Capacity (swing over bed)
16"
Variable Speed
0-3000 RPM
Spindle Threads
1 1/4" - 8  |
Drive
Spindle Thru Hole
9/16"
Head and Tailstock Taper
#2MT
Tailstock Thru Hole
3/8"
Tailstock Spindle Travel
4"
Tool Rest
12"
Overall Dimensions
Length: 66"
Width: 21"
Height: 30 1/2"
Weight: 384 lbs. |
|
|
