Products

Dowel and Hinge Inserters

Number of insertion units 1 to 6 (3 standard)
Number of drills 1 to 6 (3 standard)
Hold down clamps 1 standard
Motor H.P. 2 H.P.
Dowel capacity (Diameter) 3/8” to 1/2” (10 to 13mm)
Dowel capacity (length) 1” to 4” (25 to 100mm)
Drill bit specification 7/16-14 thread 4-1/2 O.A.
Drill center distance 3/4” minimum
Thickness capacity 3/4” to 3”
Machine weight 1200 lbs
Dimensions 30” x 67” x 64”
Power Requirement 220/440 - 3/60

ACCU-SYSTEMS 300 Series Boring & Insertion

Over 68 linear inches of square rail bearing surface
with 8 vertical and horizontal bearing blocks.
4 second cycle time
Bore only or insert only cycle
Anti slip table surface
Micro-processor controller
Totally sealed electronic glue system with high
pressure glue pump.
2 1/2 gallon glue storage tank
1 to 6 inserters available
Totally enclosed fan cooled motor with direct drive
coupling to drill head
Steel geared drill head
18” diameter vibratory dowel hopper
One button flush system for rinsing glue
Chip blower
Dust extraction manifold
Pneumatic hold down clamp
Miter gauge with scale

Number of spindles 23 on 32mm centers
Tooling length & shank 57mm x 10mm
Power Required 220/3/60
Machine weight 1800 lbs
Dimensions 35” x 42” x 72”
Hold Down Clamps 5 standard
Drill Depth Maximum 1-9/16” (40mm)
Air Required 20-30 CFM @ 100 psi
Dowel capacity (length) 1” to 2” (25 to 50mm)

ACCU- SYSTEMS Model H-23 Boring & Insertion

5 second cycle time
Micro-processor Controller with self diagnostics
Twin dowel feeding bowls
Mirror imaging with automatic proximity switching
5 hold down clamps standard
8 insertion units standard (more available upon request)
Drill only and dowel only cycles
Sealed electronically metered glue/water injection system
1 button flush system
Centralized dust collection manifold
Digital readout for positioning of drill and insertion unit
Full length dual locking fences with sawdust groove

VITAP SIGMA 2TD AUTOMATIC DOWEL AND BORING MACHINE

Through feed glue and dowels inserting machine with possibility to fit vertical drilling heads to make double drilling passes in line with a through feed boring machine.

Injectors: 5+5 (6 +6 optional)
32mm. between spindles
0 - 70 mm. drilling depth
Spindle revolutions:2800 g/min
Min piece length: 240 mm.
Working pressure: 6-8 atm.
Motor: Hp 1,5 + 1,5
Air consumption per head: 7 Lt./Cyc

VITAP RAIL AND STACKER 1

Injectors: 4+4
Horizontal heads: Hp: 1,8 + 1,8 9 + 9 sp.
Spindle distance: 32 mm.
Air consumption per head: 7 Lt./Cyc
Drilling depth: 0 - 70 mm.
2800 g/min spindle revolution
Working pressure: 6-8 Atm.
Weight with 2 heads: 1800 kg.

The high productivity solution for rails and drawers. Horizontal heads in sequence with glue and dowel injectors. Automatic stacker to form a pallet stack with stabilizing strips.

Single side drilling machine with super effective 45 degrees clamps. The machine is able to drill horizontally and insert dowels on small and big pieces (up to 750 mms width) with choice of the injectors from the control board. It is included a washing system.

VITAP INSERIX SEMI-AUTOMATIC BORING AND DOWEL INSERTING MACHINE

Spindles: 23
Motor: 2,5 Hp
Spindle distance: 32 mm.
Air consumption per head: 7 Lt./Cyc
Drilling depth: 0 - 70 mm.
2800 g/min spindle revolution
Working pressure: 6-8 Atm.
Weight with 2 heads: 1800 kg.
Injectors: min. 5 max. 8